Open Door Via Http Command This video introduces how to use the http command feature to open doors. video outline: 0:00 overview more. Http command enables users to open doors remotely by tapping unlock buttons on akuvox indoor monitors' talking, call previewing, and monitoring screens. all akuvox intercom devices support this feature.
Open Door Via Http Command Set up unlock buttons after the http command is configured, set up unlock buttons on the desired screen of the indoor monitor. Simply enable this feature and input the http command (url) for the door phone. this will trigger the relay and open the door, even if the users are away from the device. This project is a basic web server application that allows remote control of a door lock relay using an esp8266 and a 4 channel relay module. this setup provides control over the relay through a web interface, with the esp8266 connected to wifi and accessible via a static ip. You can unlock the door remotely without approaching the device physically for the door access by typing in the created http command (url) on the web browser to trigger the relay when you are not available by the door for the door access.
Open Door Via Http Command This project is a basic web server application that allows remote control of a door lock relay using an esp8266 and a 4 channel relay module. this setup provides control over the relay through a web interface, with the esp8266 connected to wifi and accessible via a static ip. You can unlock the door remotely without approaching the device physically for the door access by typing in the created http command (url) on the web browser to trigger the relay when you are not available by the door for the door access. In the dtmf type, otherwise dtmf code cannot be applied. 1.49.2. door unlock via h ttp command you can unlock the door remotely without app roaching the device physically for the door access by t yping the created the http command (url) on the web browser to trigg er the relay when you are not available by the door for. This article is showing you how to configure the switch codes within the my2n service to be able to open doors. in case you don't have an electric lock connected to the intercom, please read the following articles before configuring the switch:. If this doesn't interest you and you just want to unlock your lock (without status), there's a "light" version that's just a driver with the ability to send the open command via http post. User name: enter the user name you configured on the door phone; password: enter the password you configured on the door phone; doornum: choose the relay you want to trigger. step 2 when you want to configure the unlock button on the talking page, the operation route is as follow: phone>relay>softkey in talking page,.
Comments are closed.