Maldaner Impregnation System Maldaner Imprägnier Systeme Maldaner est le leader européen dans le domaine de l'imprégnation des pièces poreuses. 40 années d'expérience ont forgé une réputation reconnue auprès des plus grands industriels. maldaner s'adresse à toute entreprise qui doit réaliser ou fournir des pièces étanches. Development, design and production of impregnation systems from small manually operated units to fully automated lines. over 50 years of experience in impregnation technology enable the best engineering in our impregnation systems.
Maldaner Impregnation System Maldaner Imprägnier Systeme To complete the impregnation process, the parts are cured in a polymerization bath at 90°c. during this process, the resin that has filled the pores hardens rapidly from the surface and prevents the resin in the pores from flowing out. this ensures that the pores remain completely filled with resin. Description of the process and the various steps involved in injecting methacrylate resin into the material's porosities to permanently seal leaking parts .more. Curing of the sealant takes place in the polymerisation bath at 90 °c. rapid initial curing at the surface prevents bleeding out of the sealant from the porosity. impregnation sealant can penetrate into the porosity due to the vacuum removing all of the air. Impregnation: an economic and reliable solution to save casting. the use of high grade production equipment and resins, as well as a highly trained team has helped to confirm the quality of the maldaner impregnation system in all industrial sectors (automobile, aeronautics, gas, hydraulics, food ).
Maldaner Impregnation System Maldaner Imprägnier Systeme Curing of the sealant takes place in the polymerisation bath at 90 °c. rapid initial curing at the surface prevents bleeding out of the sealant from the porosity. impregnation sealant can penetrate into the porosity due to the vacuum removing all of the air. Impregnation: an economic and reliable solution to save casting. the use of high grade production equipment and resins, as well as a highly trained team has helped to confirm the quality of the maldaner impregnation system in all industrial sectors (automobile, aeronautics, gas, hydraulics, food ). The process involves applying a vacuum to evacuate air from pores, forcing an impregnation sealant into the pores under atmospheric pressure, curing the sealant in a polymerization bath, and drying the parts to prevent corrosion. We impregnate components of all shapes and sizes and all types of material. we have the experience to undertake one off specialised processing, including items that will not fit into one of our impregnation systems. Impregnation is the most effective, environmentally friendly, and cost efficient way of sealing parts. it ensures the penetration of special synthetic resins into the parts under vacuum. metal impregnation is a process applied to protect metal surfaces and extend their longevity. As impregnation does not affect the dimensions or the mechanical characteristics of the components, no further corrective work is needed.
Comments are closed.