Grandma2 Npu Network Processing Braveo Review of creating a network session on the grandma2 console. Consoles and grandma2 onpcs are called stations and are connected to a session using the ma network control. they cannot be invited or forced to connect from this interface, but the dmx ports and timecode can be configured. stations in the session will also appear in the ma network configuration.
Grandma2 Npu Network Processing Braveo I don't fully understand the problem yet, but the network is running as expected now. i'm not sure why that switch was causing such a problem for everything that i wanted to run on that session. Grandma2 initial network setup this guide will walk you through setting up the ip address on any grandma2 or grandma2 onpc console and enabling the sacn network. Ma sessions are still the backbone of our console and processing networks. we’ll look at the network window, dmx protocols, and output configuration (including sacn and artnet). There can be a maximum of 31 sessions. each session needs a unique session number (between 1 and 31). there is always a line in the session control that "holds" the stations that are not currently in a session. this line is called not connected.
Grandma2 Session Over The Internet R Grandma2 Ma sessions are still the backbone of our console and processing networks. we’ll look at the network window, dmx protocols, and output configuration (including sacn and artnet). There can be a maximum of 31 sessions. each session needs a unique session number (between 1 and 31). there is always a line in the session control that "holds" the stations that are not currently in a session. this line is called not connected. It is always the master in a session that transmit and receive the network dmx data. each of the different network protocols have at least one configuration line. Network sessions for multi user programming, connecting to ma3d, vpus, npus, etc. There is a short description of what is networking. there are some useful information about setting ip addresses in consoles and in grandma2 onpc. ma devices communicate and connect in a session. there is a section describing all the relevant topics about sessions. the network can be used to get dmx in and out of system. Problem: session between a single ma2 light and an npu (both running 3.9.60.27) is proving unstable and slow. first noticed it 2 days ago when the console briefly lost control of the rig. we thought we had resolved the issue with several hard resets.
Comments are closed.