Dyno2 Dynamometer Software Perek We create dyno2 to handle all types of dynamometers with a variety of accessories. all systems are designed transparently and allow the user to control his own settings. Right click the run that is loaded to analyze tab and select "export to csv". in the export dialog, select the "zdyno" preset, click ok and save the file. the "zdyno" export preset is available since software version 6.2.0 and adds a fixed format info block and column data.
Dyno2 Dynamometer Software Perek Ip camera support in perek dyno2 dynamometer software. steady state speed control on chassis dyno with perek dc1 controller and bd3 power supply. To use the software, a display with resolution at least full hd (1920×1080) is required. keyboard and pointing device (mouse) is required. a mouse with scroll wheel and scroll wheel button is recommended. the software runs on raspberry pi os installed on the dc series controller computer. How to set up perfect control architecture for your dynamometer in dyno2 software. Ip camera support in perek dyno2 dynamometer software. how to set up ip camera recording and preview in dyno2.
Dyno2 Dynamometer Software Perek How to set up perfect control architecture for your dynamometer in dyno2 software. Ip camera support in perek dyno2 dynamometer software. how to set up ip camera recording and preview in dyno2. Hello, i'm working at retrofitting a perek dc2l and bd2 to my older dynomite land&sea roller dyno with eddy brake. i'm working at familiarizing myself with the dyno2 software. Execution permission must be added to the software file, like shown on the example below. sometimes you may encounter a problem, that the software won't run simply after double click. How to set up engine knock detection in dyno software. note: in the video, the knock frequency to cylinder diameter conversion is wrong. it's been fixed now. … more. Instructions how to use dyno2 dynamometer software run tab to make new measurements and work with engines on absorption dyno.
Comments are closed.