Dataflex 16 Drives Control The recently developed dataflex® 16 extends the existing range ofcontactless torque measuring shafts and is available for measuringtorque ranges of 10 nm, 30 nm and 50 nm. Shift the driving and driven machine in axial direction until the dimension e resp. dbse is reached. if the power packs have already been firmly assembled, shifting the hubs axially on the shafts allows for adjusting the dimension e or dbse (see illustration 8).
Dataflex 22 Drives Control The dataflex 16 torque measuring shaft uses a two channel shaft encoder that provides two speed signals shifted by 90 degrees. each signal has a resolution of 360 periods per revolution. Customised solutions and special designs the ktr torque sensors type dataflex® 16 to dataflex® 110 cover a torque range from 10 nm to 20,000 nm. 24 bits. thus, the inaccuracy of torque measuring is reduced to less than 0.1 % of the measuri. The recently developed dataflex® 16 is available for measuring torque ranges of 10 nm, 30 nm and 50 nm. the torque is measured using the well approved technology of wire strain gauges combined with the latest electronic components. Displace the drive and driven machine in axial direction until reaching the s and l8 dimension. if the aggregates have already been fixed, adjust the s and l8 dimension (see illustration 8) by axially displacing the hubs on the shafts.
Dataflex 140 Drives Control The recently developed dataflex® 16 is available for measuring torque ranges of 10 nm, 30 nm and 50 nm. the torque is measured using the well approved technology of wire strain gauges combined with the latest electronic components. Displace the drive and driven machine in axial direction until reaching the s and l8 dimension. if the aggregates have already been fixed, adjust the s and l8 dimension (see illustration 8) by axially displacing the hubs on the shafts. Dataflex® measures torques without contact or radio frequency, is maintenance free and has a high frequency of response – all at low cost. its secret is an innovative, patented measuring method. Sensor360 provides professional information on the dataflex® 16 torque sensors for ktr, covering its features, applications, and specifications. learn about the pricing, inventory, datasheet pdf, and equivalent parts for the dataflex® 16 torque sensors. The connection housing df02 contains control switches and leds for offset adjustment and sensor test. for reasons of safety the sensor test can only be performed during the first 15 seconds after switching on. Along with the established sizes of dataflex®16 to dataflex®110 measuring ranges from 10 nm to 20,000 nm are covered. with the new series the torque is measured using the approved technology of wire strain gauges dms while processing contactlessly with a revolution of 24 bit.
Dataflex 16 With Radex Nc Drives Control Dataflex® measures torques without contact or radio frequency, is maintenance free and has a high frequency of response – all at low cost. its secret is an innovative, patented measuring method. Sensor360 provides professional information on the dataflex® 16 torque sensors for ktr, covering its features, applications, and specifications. learn about the pricing, inventory, datasheet pdf, and equivalent parts for the dataflex® 16 torque sensors. The connection housing df02 contains control switches and leds for offset adjustment and sensor test. for reasons of safety the sensor test can only be performed during the first 15 seconds after switching on. Along with the established sizes of dataflex®16 to dataflex®110 measuring ranges from 10 nm to 20,000 nm are covered. with the new series the torque is measured using the approved technology of wire strain gauges dms while processing contactlessly with a revolution of 24 bit.
Dataflex Connection Kit Drives Control The connection housing df02 contains control switches and leds for offset adjustment and sensor test. for reasons of safety the sensor test can only be performed during the first 15 seconds after switching on. Along with the established sizes of dataflex®16 to dataflex®110 measuring ranges from 10 nm to 20,000 nm are covered. with the new series the torque is measured using the approved technology of wire strain gauges dms while processing contactlessly with a revolution of 24 bit.
Comments are closed.