1025r Tractor

When exploring 1025r tractor, it's essential to consider various aspects and implications. Model Year 2025 1025R Deck Drop Problem | Green Tractor Talk. The cam which is part number TR120288 shows as being for 2025 1023e and 1025r only. The prior model year machines from 2013 to 2024 used a cam which was part number TR107450 in the mechanical mid mower lift system. The cam would be a key part in keeping the mower at the same setting. The actual mower knob seems to be the only shared part in the old and new systems (other than the some bolts ...

2025R question - pros/cons vs 1025R. | Green Tractor Talk. The 1025R was a billy goat that went up anything but the 2025R struggles on inclines under load. That’s something I didn’t think would happen but it could use a granny gear.

JOHN DEERE 1023E & 1025R SERVICE SCHEDULE - Green Tractor Talk. Check radiator coolant freeze point and clarity of coolant. See your John Deere Dealer for service, or to order a John Deere Coolant Test Kit. Pallet Frame and Forks Recommendation for New 1025r.

I'm buying my first tractor, new 1025r, this week and looking for recommendations for a pallet frame and fork setup. The dealer has the AP11 42" setup in... Furthermore, 1025R 1023E 1 series mower setup and adjustment.... There was a change mid 2020 where new/different hardware was introduced for the mechanical lift for the 54 and 60D mower decks. I picked up a fresh 1025R with the 60D mower deck a couple of days go. Everything was in crates when loaded on my truck, so this post will serve both for during the...

Realigned the 4wd shift lever. It's important to note that, deere redesigned the 1025R in mid 2017 and one of the changes they made (and not for the better IMO), was to reposition the 4wd lever, from just to the right side of the seat to almost fully under the seat and closer to the floor. It's important to note that, way more awkward to engage/disengage 4wd.

I have a 2017 and a... Three years with a 1025R: a "review" with some experience behind it. 1025R TLB with the 53" loader bucket and 12" backhoe bucket, 54" mower deck (no AutoConnect!), 54" snowblower, 647 tiller, and a ballast box.

Another key aspect involves, fitted an RIO override, added several KBOGH products (a pair of hooks on the loader bucket, a clevis mount to the backhoe, and the diff lock pedal), a GoPro mount on top of the ROPS, R2 Manufacturing 2x 4" Edge Tamers and Edge Extenders. Mirrors for 1025r | Green Tractor Talk. It's important to note that, i had mirrors bolted on my loader arms on my 1025r. Both had plastic backs, and both cracked.

I think they were about 7” x 10”.