Dlinkap 1360 Setup

Understanding dlinkap 1360 setup requires examining multiple perspectives and considerations. How do I set up and install my Wireless Extender? Step 3: Then open a web browser and enter http://dlinkap.local in to the address bar. You can also use the IP address http://192.168.0.50.

Similarly, step 4: If this is your first time setting up the DAP-1320, the Wi-Fi Connection Setup Wizard will automatically begin. Otherwise, the Admin Password field should be left blank. 0.50 Step 4: The default username is Admin and the password is to be left blank. Step 5: Click Setup Wizard Step 6: Click next D-Link Technical Support.

in to the address bar. or enter the IP address of the extender (default is 192.168.0.50). You should be directed to the configuration page and the Install Wizard will appear. Note: The default IP address for most D-Link Access Points is 192.168.0.50. Step 1: Connect your computer to your access point.

This can be done by connecting it through a switch or connecting it directly to your computer. If you connected the access point to a router with DHCP enabled, you will need to look at the DHCP table in your router for the IP address, then skip to step 3. Similarly, note: If you cannot access it using http://dlinkap.local, try http://192.168.0.50. How do I configure the Access Point DAP-1360 as a repeater?. - From a computer connected to the router via cable or Wi-Fi open your browser (Internet Explorer, Mozilla Firefox, Opera or Chrome) and enter the access point settings in your browser by typing the address http://dlinkap

Comment configurer et installer mon répéteur sans fil - D-Link. Etape 3 : Ouvrez votre navigateur et entrez http://dlinkap.local dans la barre d'adresse. Vous pouvez également utiliser l'adresse http://192.168.0.50. Etape 4 : Si vous n'avez pas encore configuré votre DAP-1520, le nom d'utilisateur par défaut est Admin et le mot de passe doit être laissé vide.