Supplemental Inspection 53 11 01 Pdf Unfortunately, the sid issued on the cessna 441 and conquest turboprops did not include input from all operators and has never received final faa approval. further, no airworthiness directive (ad) has ever been issued covering the items listed in the sid for either aircraft. This is an explanatory document for all owners, registered operators and maintainers of cessna aircraft for the requirement to comply with cessna supplemental inspection documents (sids), to ensure the continued airworthiness of the affected cessna aircraft.
Cdi Self Inspection Document Pdf Calibration Liquefied Petroleum Gas This document summarizes the requirements for owners and operators of cessna aircraft to comply with cessna supplemental inspection documents (sids). the sids were developed by cessna and the faa to address aging concerns for cessna aircraft and identify critical structural elements that require inspection. The supplemental inspection program is valid for model 441 airplanes with less than 22,500 hours. beyond this, continued airworthiness of the airplane can no longer be assured. The purpose of this advisory is to provide guidance for aircraft operators and maintenance providers regarding compliance with published cessna supplementary inspection document (sid) requirements. Textron aviation supplemental inspection documents (sids) 55 10 01, as applicable to model year (for single engined types, see attached); for model 208 208b aeroplanes, refer to mm 27 30 00 720 rev.33 dated may 15, 2017.
Archive Of Sid Pdf The purpose of this advisory is to provide guidance for aircraft operators and maintenance providers regarding compliance with published cessna supplementary inspection document (sid) requirements. Textron aviation supplemental inspection documents (sids) 55 10 01, as applicable to model year (for single engined types, see attached); for model 208 208b aeroplanes, refer to mm 27 30 00 720 rev.33 dated may 15, 2017. In response to the faa’s national aging aircraft program, aircraft manufacturers are considering development of supplemental inspection documents (sids) specifying inspections and or modifications to maintain the airworthiness of aging aircraft. Note: the structural significant items (ssi) referenced in this flow chart are special ssis listed in the boeing supplemental structural inspection documents (ssid), which requires supplemental inspections using the dtr check forms included in the document. The function of the supplemental structural inspection program is to find damage from fatigue, overload or corrosion through the use of the nondestructive inspections (ndi), and visual inspections. this supplemental inspection document (sid) is only for primary and secondary airframe components. The program focused on developing a supplementary inspection document (sid) for all variants of the cessna model 402 based on state of the art damage tolerance analysis techniques.
Comments are closed.