An Introduction To Submodeling Techniques For Stress Analysis Using The submodeling feature in mechanical enables you to import the solution output of an upstream (source) analysis and apply that output as boundary conditions in the downstream (target) system in order to more closely analyze a region of interest. Insight on the efficient method of submodeling in ansys mechanical and how to use submodeling to boost your engineering needs.
Ansys Mechanical Shell Modeling Submodeling, as the name suggests, is the modeling of a portion of the larger (global) model to capture the effects of refined mesh in a smaller model. this is done to avoid having the whole. Submodeling, as the name suggests, is the modeling of a portion of a larger (global) model to capture the effects of refined mesh in a smaller model. this is done to avoid having the whole assembly meshed with fine elements. Submodeling allows analyzing a small region of a larger model with a more refined mesh. it involves solving a global model, creating a submodel with cut boundaries far from load and constraint areas, applying loads to the submodel boundaries, and verifying results. Submodeling is a technique where a coarsely meshed model can be solved followed by a subsequent solution using only a portion of the coarse model with a more refined mesh.
Ansys Mechanical Github Submodeling allows analyzing a small region of a larger model with a more refined mesh. it involves solving a global model, creating a submodel with cut boundaries far from load and constraint areas, applying loads to the submodel boundaries, and verifying results. Submodeling is a technique where a coarsely meshed model can be solved followed by a subsequent solution using only a portion of the coarse model with a more refined mesh. Submodeling is one of those “tricks” in stress analysis that used to be used all the time. but until recently it was a bit of a pain to do in ansys mechanical so it fell out of use. now, the process of doing submodeling is easy, efficient, and accurate. The figure illustrates how to deal with the problem by using submodeling to create a finer mesh on the region (submodel) of interest. Submodeling is now a quick, effective, and precise technique. the goal of this article is to explain the idea to more experienced (old) users and demonstrate how much simpler it is to complete in ansys mechanical compared to mechanical apdl. Starting from a global beam and shell model, this tutorial video shows how to easily and quickly take results into a detailed solid model to evaluate details.
Comments are closed.