Solved Reverse Alignment Issue Autodesk Community An option would be to leave the alignment as it is and just reverse the stationing with a station equation. (just be sure all your labeling refer to station and not raw station). Because when creating an alignment, users of civil 3d either ignore the software when it asks if they would like to reverse the alignment or maybe they are uncertain of the answer until after they have already created it.but don’t panic, this tutorial will help you because there is always a solution for every problem.
Solved Reverse Alignment Issue Autodesk Community Reversing alignment direction in autocad is essential when working on designs that require specific orientation adjustments. this task can greatly influence how your drawings are interpreted and presented. below are detailed steps to effectively change the alignment direction. In this video, learn how to reverse the alignment direction to satisfy design requirements. Unfortunately reversing the alignment only reverses the horizontal alignment. your fg profile data is not reversed in line with the horizontal alignment being reversed. The problem was the geometry of your alignment. after changing the start station you can see is able to create a connected alignment, before was not able to find geometric solution.
Solved Reverse Alignment Issue Autodesk Community Unfortunately reversing the alignment only reverses the horizontal alignment. your fg profile data is not reversed in line with the horizontal alignment being reversed. The problem was the geometry of your alignment. after changing the start station you can see is able to create a connected alignment, before was not able to find geometric solution. I think you will need to make adjustments in the best fit options so, that you can reverse your alignment. hope this helps! please select the ‘accept as solution’ button if my post solves your issue or answers your question so, other community members may benefit. I have noticed that if one tries to 'reverse label' on an alignment curve label, the chord bearing does not reverse. The issue is that there is a scaled up version of the alignment that is glued to a certain place relative to the viewport. there are also 2 view cubes for some reason. When you add an alignment sub element to an existing alignment, the sub element direction is determined by the direction in which it was drawn. if the sub element direction is different from the alignment, the sub element cannot become part of the solved alignment geometry.
Comments are closed.