P Pod Measurements P Pod Seating The standard sizes are symmetrical and designed for users who have good body symmetry. see the size chart below for measurements. P pod sizing table measurements (size 2)xsmall (size 3)small (size 4) medium (size 5) large (size 6) xlarge a hip width 250 (10”) 260 (10¼”) 310 (12¼”) 360 (14¼”) 420 (16½”) b trunk width 220 (8¾”) 250 (10”) 270 (10½”) 320 (12½”) 340 (13½”) c seat depth 230 (9”) 290 (11½”) 330 (13”) 350 (13¾”) 430 (17”) d.
P Pod Measurements P Pod Seating Key measurements the client should be lying down on their back on a firm flat surface. p pod sizing chart please tick the measurements in the box above (measurements are in inches). Standard sized ‘p’ pods (symmetrical) • standard ‘p’ pod seats are available in different sizes and can be used for various clients whose dimensions fall within this size range. This user manual provides instructions on assembling, positioning, cleaning, and using the p pod seating system, including optional accessories like the flip over headrest and mobile base. There are three components to the ‘p’ pod – the seat, a bolster support and the beanbag or pod.
P Pod Seating The Postural Support Beanbag This user manual provides instructions on assembling, positioning, cleaning, and using the p pod seating system, including optional accessories like the flip over headrest and mobile base. There are three components to the ‘p’ pod – the seat, a bolster support and the beanbag or pod. Specifications hip width trunk width seat depth axilla height shoulder height head height bolster size bean bag size. The p pod is made from moulded foam, therefore the individual measurements e.g. hip width or seat depth are fixed. however, we can provide lateral or thigh supports if required. Position the leg at a right angle. measure from the bottom of the rear of the buttock to the top of the shoulder for shoulder height; to the top of the head for head height. Lift up the two rear seat straps from the ‘p’ pod and attach the lap tray straps onto these two velcro pads (fig.8b), fit the seat straps in place on top of the tray straps. correctly fitted tray (fig.8c), removal is a reversal of the above, but make sure the seat straps are refitted to the ‘p’ pod. the bean bag can be removed from the.
P Pod Seating The Postural Support Beanbag Specifications hip width trunk width seat depth axilla height shoulder height head height bolster size bean bag size. The p pod is made from moulded foam, therefore the individual measurements e.g. hip width or seat depth are fixed. however, we can provide lateral or thigh supports if required. Position the leg at a right angle. measure from the bottom of the rear of the buttock to the top of the shoulder for shoulder height; to the top of the head for head height. Lift up the two rear seat straps from the ‘p’ pod and attach the lap tray straps onto these two velcro pads (fig.8b), fit the seat straps in place on top of the tray straps. correctly fitted tray (fig.8c), removal is a reversal of the above, but make sure the seat straps are refitted to the ‘p’ pod. the bean bag can be removed from the.
P Pods P Pod Seating Position the leg at a right angle. measure from the bottom of the rear of the buttock to the top of the shoulder for shoulder height; to the top of the head for head height. Lift up the two rear seat straps from the ‘p’ pod and attach the lap tray straps onto these two velcro pads (fig.8b), fit the seat straps in place on top of the tray straps. correctly fitted tray (fig.8c), removal is a reversal of the above, but make sure the seat straps are refitted to the ‘p’ pod. the bean bag can be removed from the.
P Pods P Pod Seating
Comments are closed.