8 2 2 7 Packet Tracer Configuring Ospfv2 In A Single Area Keep in mind that the router lsa always stays within the area. the second lsa type (network lsa) is created for multi access networks: the network lsa or type 2 is created for each multi access network. remember the ospf network types? the broadcast and non broadcast network types require a dr bdr. #packettracer #ospf #ccnp #ccna.
Ospf Network Lsa Type 2 Lsa Nocsma Network lsa (type 2) is the other lsa type used in standard areas. this lsa is sent by dr. the main aim of this lsa type is listing the connected routers in the segment and informing the other routers. this lsa includes information like dr, bdr ip addresses, subnet masks. network lsa can not pass abr, so it can not reach to the other areas. E1 e2 routes are the type 5 lsas that represent the external routes that are advertised by an asbr in a non stub area, a normal area. n1 n2 routes are the external routes advertised by an nssa asbr into an nssa area as type 7 lsas. Lsa type 2 (network lsa) packets are generated by the designated router (dr) to describe all routers connected to its segment directly. lsa type 2 packets are flooded between neighbors in the same area of origin and remain within that area. Type 2 (network link advertisement) this is a type 2 lsa which is send by dr (designed router) only to all the other routers present in the same area (broadcast or multi access network) . these contain the dr and bdr ip information and also the state of other routers that are part of same network.
Configuring Ospf In Packet Tracer Ccna Tutorials Lsa type 2 (network lsa) packets are generated by the designated router (dr) to describe all routers connected to its segment directly. lsa type 2 packets are flooded between neighbors in the same area of origin and remain within that area. Type 2 (network link advertisement) this is a type 2 lsa which is send by dr (designed router) only to all the other routers present in the same area (broadcast or multi access network) . these contain the dr and bdr ip information and also the state of other routers that are part of same network. Lsa type 2: network lsa definition: type 2 lsas, also known as network lsas, are generated by the designated router (dr) in a broadcast or non broadcast multi access (nbma) network. By definition with ospfv2 the content of the lsa type 2 describes the network segment listing the dr address, the attached routers, and the used subnet mask. this information is used by each router participating in ospf to build the exact picture of the described multiaccess segment, which cannot be fully described with just lsas type 1. Ospf type 2 lsa network lsa packets are generated by the ospf designated router (dr) to describe all routers connected to its segment directly. type 2 lsa is flooded between neighbors in the same ospf area and doesn't cross the area boundary. This tutorial explains what an lsa is, lsa types, lsa data structure, lsa flooding, and how ospf uses an lsa to exchange network information.
Comments are closed.