Exp 4 Air Flow Process Control Pdf Valve Theory This lab report summarizes an experiment measuring the discharge coefficient of an orifice plate in an air flow rig. the experiment uses manometers, venturi tubes, orifice plates and a pitot tube to collect pressure readings at various points along the rig under different damper openings. Then from table 4 calculate the cd for the orifice plate for each damper opening using the standard nozzle where its cd is assumed to be 0. and from table 4 data calculate the cd of the 50mm nozzle for each damper opening using the calculated cd of the orifice plate.
Lab 3 4 Pdf This lab manual provides students with the theory, practical applications, objectives, and laboratory procedure of ten experiments. the manual also includes educational videos showing how student should run each experiment and a workbook for organizing data collected in the lab and preparing result tables and charts. Conclusions: in conclusion, the objective of this laboratory was to study the expansion of air discharging from a reservoir, through a converging nozzle, and measure the thrust and pressure compared to theoretical values related to expansion assumptions. The airflow system has been specifically designed to allow students to investigate a wide range of and low speed air flow phenomena and fundamental aerodynamics. This work conducted a full scale experiment in an office, and a computational fluid dynamics (cfd) simulation study for a radiant cooling ceiling system integrated with air dehumidification.
Lab 3 4 Workshop Pdf Welding Construction The airflow system has been specifically designed to allow students to investigate a wide range of and low speed air flow phenomena and fundamental aerodynamics. This work conducted a full scale experiment in an office, and a computational fluid dynamics (cfd) simulation study for a radiant cooling ceiling system integrated with air dehumidification. Procedures are outlined for calibrating flow measurement devices and taking pressure readings at different flow rates. safety precautions are noted for draining air and properly handling the apparatus. We need to compare flow measurement devices, specifically pitot tubes (and pitot tube traverses) with orifice plate flow measurements. we need to create a set of pump and system curves. By pressurizing an air tank, then discharging through a converging nozzle and directing the flow onto a load cell, experimental data was obtained to validate compressible flow theories. It is an interdisciplinary research group dedicated to understanding the nature of turbulence and examining turbulent flow processes in different natural, industrial, and engineering environments using experimental, numerical, and theoretical approaches.
Lab 3 Pdf Procedures are outlined for calibrating flow measurement devices and taking pressure readings at different flow rates. safety precautions are noted for draining air and properly handling the apparatus. We need to compare flow measurement devices, specifically pitot tubes (and pitot tube traverses) with orifice plate flow measurements. we need to create a set of pump and system curves. By pressurizing an air tank, then discharging through a converging nozzle and directing the flow onto a load cell, experimental data was obtained to validate compressible flow theories. It is an interdisciplinary research group dedicated to understanding the nature of turbulence and examining turbulent flow processes in different natural, industrial, and engineering environments using experimental, numerical, and theoretical approaches.
Comments are closed.