How To Reset A Hikvision Ip Camera To Factory Default Settings Via My How do i default a hikvision ip camera? answer: 1. press and hold the reset button on the camera for a total of 1.5 minutes (90 seconds). 2. after the first 30 seconds disconnect the network cable with your other hand, do not let up on the reset button. wait 30 seconds. 3. re connect the network cable, again do not let up on the reset button. Disconnect the camera power supply cable (or the poe cable). press and hold the reset button. connect the camera power supply cable (or the poe cable). keep holding the reset button for 20 seconds. release the reset button.
How To Reset A Hikvision Ip Camera To Factory Default Settings Via My Disconnect the camera power supply; press and hold the reset button; connect the camera power supply; keep holding the reset button for 15 seconds; release the reset button. To factory reset your hikvision camera follow these steps: log in with your username and password. then, on the left navigation bar, select device management. please scroll down to reset camera and select it. on the next page, you’ll be able to choose the language and region for your camera. This quick and simple guide will help you restore your camera back to its default settings—perfect if you’ve forgotten your password, changed network configurations, or need to start fresh. Hold down reset button (see image above) while plugging in poe cable, and keep it held for at least 10 seconds. wait a minute or so for the camera to reset and boot up. set your computer's network interface to 192.168.1.x subnet (i set mine to the manual ip 192.168.1.2).
How To Reset A Hikvision Ip Camera To Factory Default Settings Via My This quick and simple guide will help you restore your camera back to its default settings—perfect if you’ve forgotten your password, changed network configurations, or need to start fresh. Hold down reset button (see image above) while plugging in poe cable, and keep it held for at least 10 seconds. wait a minute or so for the camera to reset and boot up. set your computer's network interface to 192.168.1.x subnet (i set mine to the manual ip 192.168.1.2). Go to: configuration>maintenance> upgrade& maintenance> default > restore. by clicking the “restore”, all parameters of your camera will be reset back to factory setting, except the ip address the camera is using. In this article, we will walk you through the steps to reset your hikvision ip camera to factory default settings, ensuring that your surveillance system continues to function smoothly. Press and hold the reset button using a suitable tool (such as a paperclip for pinhole buttons). while holding the reset button, reconnect the power supply or network cable to the camera. continue to hold the reset button for approximately 10 15 seconds. you may observe the camera’s indicator lights flashing during this time. Browse for the device’s ip in the address bar, and then log in to the device using the username and password you gave when first setting it up. once logged in, click on the configuration tab at the top of the page. click the default option to reset the device back to its inactive factory state.
Comments are closed.